MA 630 band saw – A real mobil band saw!
The MA 630 raised floor band saw, the successor to the MA 615 raised floor band saw, is absolutely perfect. This band saw accompanies you when you go to work. You can easily set up the MA 630 wherever it is needed. Ready for use within 40 seconds and disassembled as quite as fast – this is the clear advantage of this saw. You can use it almost immediately at any place and stow it in the luggage compartment of every type of car. Even indoor sawing will not cause any problems because of the special suction unit. The MA 630 is suited to cut almost every material especially calcium sulphate access flooring panels, chipboard flooring panels, wood, gypsum boards, steel and plastics. Whatever you want to saw – the MA 630 allows you to do it. An all purpose band saw – mobile and transportable.
The MA 630 is an incredibly tough and hard working portable band saw. The frame is jig welded 1/8 section steel, for both, strength and lightness. All wheels have dual bearings to ensure of smooth trouble free operation. Machine covers are formed in automotive specification A.B.S which is both, durable and light. The unit comes with a top quality 3/4 horse power 2 pole motor, mated to a precision machined gear box for mechanical reliability second to none. Every aspect of the MA 630 has been over engineered to ensure that you will only ever need to buy one! We have sold machines that have been in service day in day out of trouble free for years, operation in the most testing of working environments that have paused only to have a worn blade changed.
If you are looking for a portable, reliable and robust raised-access floor band saw, there is only one choice MA 630!
Cuts calcium sulphate access flooring panels, chipboard flooring panels, wood, gypsum, steel and tiles. In fact anything you can throw at it .
625 mm deep throat and 210 mm height of cuts!
The MA 630 raised floor band saw is equipped with a dust extraction system which, when connected to a vacuum cleaner, enables virtually dust-free working.
The tool was designed with the professional in mind and is an incredibly tough hard working machine, well able to cope with the daily abuse of modern industry.
Compact design allows transport in almost any car boot.
Exploded view MA 630 – click to enlarge
Explosion view for MA 630
A. Frame
B. Idle wheel – MA 07 – Alloy
C. Drive wheel – MA 06 – Alloy
D. Swinging arm – MA 12
E. Tension assembly – MA 11
F. Idle shaft – MA 05
G. Blade guide adjuster block – MA 26
H. Top blade guide, complete – MA 100
I. Bottom blade guide, complete – MA 100
J. Drive shaft, with bearing – MA 04
K. Bearing for drive shaft – MA 09
L. Spacer – MA 36
M. Gearbox spacer locator
N. Gearbox spacer – MA 03
O. Gearbox – MA 02
P. Motor – MA 01
Q. Back rub block – MA 16
Spare parts list for MA 630
Part No. / Part name
MA 01 Motor
MA 02 Gearbox
MA 03 Gearbox spacer
MA 04 Drive shaft, with bearing
MA 05 Idle shaft
MA 06 A Drive wheel Alloy
MA 07 A Idle wheel Alloy
MA 08 Wheel belt fot Alloy wheel
MA 09 Bearing for all wheels
MA 11 Tension assembly
MA 12 Swinging arm
MA 13 Blade guide rollers 2 off
MA 14 Look to MA 100 (only complete)
MA 15 Look to MA 100 (only complete)
MA 16 Back rub block
MA 17 Table
MA 18 Table catch
MA 19 Table clips
MA 20 Legs (only per set)
MA 21 Front cover
MA 22 Rear cover
MA 22 E Electric box cover
MA 23 Micro switch
MA 24 Cover hinges
MA 25 Cover clips
Exploded view MA 630 – click to enlarge
MA 26 Blade guard complete
MA 27 Stopswitch “red”
MA 29 Startswitch “green”
MA 31 Motor contactor
MA 32 Set capacitor
MA 33 Male plug with lead
MA 35 Adjusting spring
MA 36 Wheel spacer
MA 100 Blade guide complete (contains Parts 13/14/15) Both blade guides are equal
MA 173 Cotter pins and chain